L

landrovermadness

New Member

• Jan 12, 2009

• #1

how does the top piece of a 90 dash come out without damaging it.
i have taken the scerws out of the top of the dash including the air vent scerws and it still wont move advice please......

 

Pikey

Dummy Ejection Facilitator..

• Jan 12, 2009

• #2

you have to remove almost all the dash to get the top section off.

 

L

landrovermadness

New Member

• Jan 12, 2009

• #3

oh! thats why it wont move then. only want to remove the gery bit in the middle

 

bustersbus

Well-Known Member

• Jan 12, 2009

• #4

If ye're on about just the top bit where yer ashtray fits, then ye need to undo the two ends. There is a screw either side and there's also two screws below and either side of the ashtray.

 

Sam's Truck

New Member

• Jan 13, 2009

• #5

How do you get the lower dash out? The bit by your knees?

 

Pikey

Dummy Ejection Facilitator..

• Jan 13, 2009

• #6

it's a pig with bits everywhere. basically remove everything else 1st. and you'll see how it comes out.

 

Sam's Truck

New Member

• Jan 13, 2009

• #7

Where would you recommend putting speakers in the front of a 90 then?

 

Pikey

Dummy Ejection Facilitator..

• Jan 13, 2009

• #8

Sam's Truck said:

Where would you recommend putting speakers in the front of a 90 then?

Click to expand...

Mount em high behind ya head one on each side of the car. or put em in the door skins.

There isn't any room to fit speakers in the bottom of a 90 dash anyway. the heater's in the way.