Harry2000

Member
Hello , I know turning a 90 to a camper really awkward to do but I’m determined to do it but just struggling with this bit. How to I get some sort of platform over the passenger seat and middle box
 

Attachments

  • 228D74B0-A5CD-439D-AEB3-29897A59287D.jpeg
    228D74B0-A5CD-439D-AEB3-29897A59287D.jpeg
    288.9 KB · Views: 129
Hello , I know turning a 90 to a camper really awkward to do but I’m determined to do it but just struggling with this bit. How to I get some sort of platform over the passenger seat and middle box

Fold down shelf connected to the tub, you can get a delete kit to remove the tub at the rear
of the seats to give you more space.
 
Fold down shelf connected to the tub, you can get a delete kit to remove the tub at the rear
of the seats to give you more space.
I was hoping to go over the top of that part of the tub and go to the top of the dash but I was hoping there was better ideas that keep the tub behind the seats
 
I was hoping to go over the top of that part of the tub and go to the top of the dash but I was hoping there was better ideas that keep the tub behind the seats
Dash is higher & steering wheel in the way ;)

Put a hinged panel from bulkhead to fold forward towards the steering wheel. Have some legs that go to the floor/seat box for support.
If you only use this end for your head you will be good.

(get some big bits of cardboard make some templates up before cutting anything)
 
Dash is higher & steering wheel in the way ;)

Put a hinged panel from bulkhead to fold forward towards the steering wheel. Have some legs that go to the floor/seat box for support.
If you only use this end for your head you will be good.

(get some big bits of cardboard make some templates up before cutting anything)
Is this something you have done before?
 
Dash is higher & steering wheel in the way ;)

Put a hinged panel from bulkhead to fold forward towards the steering wheel. Have some legs that go to the floor/seat box for support.
If you only use this end for your head you will be good.

(get some big bits of cardboard make some templates up before cutting anything)

Thats what I was trying to say.
 
I would give a second vote for a bulkhead delete kit. If your sleeping platform is too high then it will be mega-claustrophobic and a real pain to get in and out of.
I think you may be pushing your luck in any case, I have a 110 which I use for camping and there is not a right lot of room in there, particularly if you add wet jackets and muddy boots etc. I struggle for room with just one person and need a Caranex tent if there is two of us.
 
If you google search - Defender 90 as campervan - it will take you to a thread on here with various options shown
 

Similar threads