Hello boys
The usual suspects - doc, zen etc - will be aware
that we commissioned a 5.4 phantom carb
engine from V8D in Lincolnshire
Instruction was to build for max torque.
Well the engine is ready and the pulls are done
This monster makes 346bhp at 5600 - and
380 lbs/ft of twist at 3500 with a very flat curve
300lbs at 2000 rpm!!!
The cam they designed is so grunty at low revs
They had to use a 600 edelbrock to give it enough fuel - first time ever he says
As soon as I get the sheets I will post them
The usual suspects - doc, zen etc - will be aware
that we commissioned a 5.4 phantom carb
engine from V8D in Lincolnshire
Instruction was to build for max torque.
Well the engine is ready and the pulls are done
This monster makes 346bhp at 5600 - and
380 lbs/ft of twist at 3500 with a very flat curve
300lbs at 2000 rpm!!!
The cam they designed is so grunty at low revs
They had to use a 600 edelbrock to give it enough fuel - first time ever he says
As soon as I get the sheets I will post them
Last edited: