melon

Active Member

• Jul 12, 2015

• #1

Temperature guage not reading anything. Had a water leak which has been fixed. No air in system. Thermostat has also been replaced. Any ideas where to look?

 

discool

Well-Known Member

• Jul 12, 2015

• #2

...Iffy sensor or its electric connection is the first place to start looking.

 

hawky666

Well-Known Member

• Jul 12, 2015

• #3

As above.. check wire to sender is still attached, if so change the sender unit as may have gone faulty.

 

cowasaki

Well-Known Member

• Jul 13, 2015

• #4

The casing of the gauge needs to be grounded. You need to check the continuity of the wiring from the sender to the gauge. The sender might be faulty. You might still have an air lock in the cooling system. The live feed to the gauge might be faulty.