Dublindisco
Active Member
My 3 amigos are on again....
In order to determine which wheel is at fault (in the absence of hawkeye) I presume if I do the following...
Jack up one wheel at a time.
Put it in first and gently let clutch out.
The jacked up wheel will start spinning and register a speed reading on the speedo. Lets say a max of 10mph before the car jumps off the jack.
The faulty wheel sensor or hub as it spins will register 0mph.
Would I be right?
In order to determine which wheel is at fault (in the absence of hawkeye) I presume if I do the following...
Jack up one wheel at a time.
Put it in first and gently let clutch out.
The jacked up wheel will start spinning and register a speed reading on the speedo. Lets say a max of 10mph before the car jumps off the jack.
The faulty wheel sensor or hub as it spins will register 0mph.
Would I be right?