tim_lewis said:

I'm looking to fit high back seats to the 2nd row of my 2000 Defender 110. I would like to use the Exmoor seats but they state that their 2nd row seats will not fit to the standard 60/40 seat frame which I have fitted but I can't stretch to the £300 they are asking for their special 2nd row seat frame.

Does anyone know if and where I could pick up a replacement 2nd row seat frame to take my exisiting set-up to a non 60/40 frame so that I can fit the Exmoor seats or any other advise on alternatives I should consider

Thanks

Click to expand...

Nerdos said:

Tim, I recently bought 2 high backs and 1 low back from ET in the beleif that I didn't have a 60/40 frame. However, I do have a 60/40 it seems (lesson learned there) but, the only thing that's not quite right is the single seat on the nearside is only held in by one bolt as the threaded holes in the seat base from ET don't quite align. I'll sort that with either putting a threaded insert in or a hefty screw. Otherwise they seem fine.
Sadly for you the seats I took out got dumped at the Nottingham civic amenity site or you could have had them for nowt.

Can post photos to support if necessary but probably not till Monday.

Click to expand...