Shippers Well-Known Member Oct 5, 2020 #1 Any advice on correct procedure as it is not easy to get at.weve double checked and there is power to it from battery and ignition switch...
Any advice on correct procedure as it is not easy to get at.weve double checked and there is power to it from battery and ignition switch...
Wimblowdriver Well-Known Member Full Member Oct 5, 2020 #2 Procedure attached. No doubt you'll find the steering gear in the way on a LHD? Attachments Land Rover Defender MY07 Workshop Manual Complete (dragged).pdf 103.7 KB · Views: 133 Land Rover Defender MY07 Workshop Manual Complete (dragged) 2.pdf 68.1 KB · Views: 138 Land Rover Defender MY07 Workshop Manual Complete (dragged) 3.pdf 70.7 KB · Views: 135
Shippers Well-Known Member Oct 5, 2020 #3 Wimblowdriver said: Procedure attached. No doubt you'll find the steering gear in the way on a LHD? Click to expand... Thanks...W.ere half way there but 10mm on top bolt that holds a bracket is turning the 13mm starter bolt and theres sod all room to get in!!
Wimblowdriver said: Procedure attached. No doubt you'll find the steering gear in the way on a LHD? Click to expand... Thanks...W.ere half way there but 10mm on top bolt that holds a bracket is turning the 13mm starter bolt and theres sod all room to get in!!
Shippers Well-Known Member Oct 5, 2020 #4 Starter loose but cant get to cable nuts as filter housing in the way so removed it and will let it drain and get starter out tomorrow...
Starter loose but cant get to cable nuts as filter housing in the way so removed it and will let it drain and get starter out tomorrow...
M myfirstl322 Well-Known Member Oct 5, 2020 #5 Much easier with a hoist, so I'd turf the Pug outside tuit suite and leave the handbrake off.