A

ankhe105

Guest

• Sep 13, 2005

• #1

I just put pads and rotors on the front. It has ABS. Now the brake light
is flashing even though the brakes seem good. Any ideas would be greatly
appreciated. Thanks so much

 

D

ds549@webtv.net

Guest

• Sep 14, 2005

• #2

you could try bleeding them, but in many cases the light wil go off
after a while of use.

 

E

Eric Roberts

Guest

• Oct 7, 2005

• #3

Make sure you didn't do anything that might have damaged a wheel speed
sensor.

<ds549@webtv.net> wrote in message
news:23430-43276EDD-14@storefull-3257.bay.webtv.net...
> you could try bleeding them, but in many cases the light wil go off
> after a while of use.
>

 

D

diamondjim

Guest

• Oct 28, 2005

• #4

"" wrote:
> I just put pads and rotors on the front. It has ABS. Now the
> brake light
> is flashing even though the brakes seem good. Any ideas would
> be greatly
> appreciated. Thanks so much

also, check all electrical connections to make sure a hookup did not
get unplugged or a wire broke when the brakes were done.

--
Posted using the http://www.autoforumz.com interface, at author's request
Articles individually checked for conformance to usenet standards
Topic URL: http://www.autoforumz.com/2001-Durango-brake-job-ftopict138136.html
Visit Topic URL to contact author (reg. req'd). Report abuse: http://www.autoforumz.com/eform.php?p=694859