Hiddenpower · Oct 28, 2010

Hi there guys. Me again. I just this weekend took my 90 for its first long Drive and have discovered that she appears to run hot. The gauge into the red after a few miles doing over 60 and cools again when I run below 60 or take a brake by the roadside. Never gets too hot below 60.

I've read about problems with the Sender and the Stat and am just wondering if anyone has any diagnostic input for the conditions this happens under.

To add to this I have stopped after I have run the engine into the hot and sat by the roadside and checked the Filler cap for the water reservoir (with a cloth for safety of course) and the reservoir whilst not cold is definately not boiling. The engine block is hot enough to burn (which I'd expect) but I could dip my fingers in the coolant reservoir without any discomfort so I am suspecting a dodgy sender first.

I will have a thermocouple/thermometer on it at the weekend maybe and see what it looks like. Any tips/suggestions?

storm99 · Oct 28, 2010

Dvy 200tdi into Def 90/110 temp sendor course thread on eBay (end time 19-Nov-10 07:30:34 GMT)

Discovery 200tdi into Def90/110 temp sendor fine thread on eBay (end time 19-Nov-10 07:30:14 GMT)

You need one of them depending on whether the one you have now has a coarse or fine thread.

woods767 · Oct 28, 2010

Hiddenpower said:
Hi there guys. Me again. I just this weekend took my 90 for its first long Drive and have discovered that she appears to run hot. The gauge into the red after a few miles doing over 60 and cools again when I run below 60 or take a brake by the roadside. Never gets too hot below 60.

I've read about problems with the Sender and the Stat and am just wondering if anyone has any diagnostic input for the conditions this happens under.

To add to this I have stopped after I have run the engine into the hot and sat by the roadside and checked the Filler cap for the water reservoir (with a cloth for safety of course) and the reservoir whilst not cold is definately not boiling. The engine block is hot enough to burn (which I'd expect) but I could dip my fingers in the coolant reservoir without any discomfort so I am suspecting a dodgy sender first.

I will have a thermocouple/thermometer on it at the weekend maybe and see what it looks like. Any tips/suggestions?

I had the same problem with mine last year, was a blocked up rad, new one fixed it. I cant remember what it was like removing the cap though, but i dont ever recall any drama from it.

It was only overheating on the motorway at high speed and on very long hill climbs (i was in the alps at the time). Even so it wasnt badly overheating, wouldent have knowen about it if it wasnt for the gauge.

Rich.

woods767 · Oct 28, 2010

storm99 said:
Dvy 200tdi into Def 90/110 temp sendor course thread on eBay (end time 19-Nov-10 07:30:34 GMT)

Discovery 200tdi into Def90/110 temp sendor fine thread on eBay (end time 19-Nov-10 07:30:14 GMT)

You need one of them depending on whether the one you have now has a coarse or fine thread.

You can also wind them into the other types thread!

Hiddenpower · Oct 29, 2010

storm99 said:
Dvy 200tdi into Def 90/110 temp sendor course thread on eBay (end time 19-Nov-10 07:30:34 GMT)

Discovery 200tdi into Def90/110 temp sendor fine thread on eBay (end time 19-Nov-10 07:30:14 GMT)

You need one of them depending on whether the one you have now has a coarse or fine thread.

Are you for sure on this? Anyway I live like 5 miles from Steve Parker so I'd rather go pick one up in person.

I was suspecting the Rad too because it wouldn't be only at high speed if it were the sender. That or the stat not opening at the right temp.

woods767 · Oct 29, 2010

Hiddenpower said:
Are you for sure on this? Anyway I live like 5 miles from Steve Parker so I'd rather go pick one up in person.

I was suspecting the Rad too because it wouldn't be only at high speed if it were the sender. That or the stat not opening at the right temp.

You can check the thermstat easily by boiling it in a pan! I pulled mine out while too i was having trouble but it was not the problem.

Hiddenpower · Nov 6, 2010

Right so I'm fairly convinced it was the sender. I had a thermocouple from work on it this morning and it reads a paltry 65 degrees so I will be having the sender out when I get the chance and getting a new one from Steve Parker sharpish.

Will update with the outcome.

nrgserv · Nov 9, 2010

Hiddenpower said:
Right so I'm fairly convinced it was the sender. I had a thermocouple from work on it this morning and it reads a paltry 65 degrees so I will be having the sender out when I get the chance and getting a new one from Steve Parker sharpish.

Will update with the outcome.

on the drive or at high speed?

my bets on the rad being cacked up.

storm99 · Nov 9, 2010

My bets still on him having the old disco sensor on the engine...Get it out and swapped for the parkers one.

Hiddenpower · Nov 9, 2010

nrgserv said:
on the drive or at high speed?

my bets on the rad being cacked up.

When starting into the red the engine reads at 65.

storm99 · Nov 9, 2010

Hiddenpower said:
When starting into the red the engine reads at 65.

No loss of fluids? Did you change the sensor when you did the conversion?

nrgserv · Nov 10, 2010

Hiddenpower said:
When starting into the red the engine reads at 65.

could be humble pie then.
have you swapped the sender?
where you measuring the temp with the thermocouple?

Woody3 · Nov 11, 2010

I had the exact same problem.

Took sensor out...went to paddocks...asked for one with the same thread out of a 19J...stuck it in. All works fine now. Needle never leaves the white.

Hiddenpower · Nov 21, 2010

Right. New senders been installed. She now no longer reads in the red. I am given to understand though that she should read in the middle normally.

I am still getting to just over 3/4 of the guage when travelling over 60mph but it will climb no higher than that level. Returns to halfway when travelling below.

Does this seem okay to you fellers or should I be hunting for further cooling problems?

Gromit2 · Nov 25, 2010

seems good mine does the same

Hiddenpower · Jan 11, 2011

Sorted!

ta Gromit.

sk sharma · Mar 15, 2011

it could be problem with thermostat .Not opening fully. replace thermostat

elsie · Mar 15, 2011

Going with the rad as the cause
P.S If we guess right is there a prize? , money or a blonde does me !!

tony74747 · Mar 15, 2011

Hiddenpower said:
Hi there guys. Me again. I just this weekend took my 90 for its first long Drive and have discovered that she appears to run hot. The gauge into the red after a few miles doing over 60 and cools again when I run below 60 or take a brake by the roadside. Never gets too hot below 60.

I've read about problems with the Sender and the Stat and am just wondering if anyone has any diagnostic input for the conditions this happens under.

To add to this I have stopped after I have run the engine into the hot and sat by the roadside and checked the Filler cap for the water reservoir (with a cloth for safety of course) and the reservoir whilst not cold is definately not boiling. The engine block is hot enough to burn (which I'd expect) but I could dip my fingers in the coolant reservoir without any discomfort so I am suspecting a dodgy sender first.

I will have a thermocouple/thermometer on it at the weekend maybe and see what it looks like. Any tips/suggestions?

air locks , drain and refill cooling syttem as per manual

Hiddenpower

New Member

storm99

Spreading Joy & Harmony

woods767

Well-Known Member

woods767

Well-Known Member

Hiddenpower

New Member

woods767

Well-Known Member

Hiddenpower

New Member

nrgserv

Well-Known Member

storm99

Spreading Joy & Harmony

Hiddenpower

New Member

storm99

Spreading Joy & Harmony

nrgserv

Well-Known Member

Woody3

Active Member

Hiddenpower

New Member

Gromit2

Member

Hiddenpower

New Member

sk sharma

New Member

elsie

Well-Known Member

tony74747

Member

Similar threads