L

landy1959/series2

New Member

• Jul 12, 2012

• #1

im just finishing off my 200 di conversion, what do i do with the outlet tube coming from the 'can; shapped item just below the plastic breather pipe on the fuel side of the engine ?

 

jamesmartin

Well-Known Member

• Jul 12, 2012

• #2

normally goes into turbo inlet pipe from filter

 

TheKeymeister

Active Member

• Jul 12, 2012

• #3

Or is he on about vacuum pipe from vacuum pump?

 

peter8315

Active Member

• Jul 12, 2012

• #4

i think he means the vacum pipe , just block it off

 

L

landy1959/series2

New Member

• Jul 13, 2012

• #5

Thanks guys, thats it a vacuum pump, I will blank it off or should I put some sort of breather on it ?

 

Last edited: Jul 13, 2012

TheKeymeister

Active Member

• Jul 13, 2012

• #6

Stick a bolt in the end and cable tie it, saves it destroying itself or something, just in case you ever put a brake servo on

 

jamesmartin

Well-Known Member

• Jul 13, 2012

• #7

needs locking off with a short hose and bolt as said in the end ,its a vacuujm pump which exhausts into cam gallery it will help pressurise engine if not capped and working