J

JA3llis

Member
Evening all I am after some advice. I bought a 2" lift kit from paddocks for my disco 1. I fitted the kit sat and to my horror the disco is very un level. The front end is pointing into the sky. Is it possible to get the springs wrong ie front on the back? The coils look thicker on one set so Id imagine these are the front? Any help would be appreciated. Thanks
 
Step away from the vehicle....Do not attempt any modifications before you kill yourself and any poor sod that happens to be in your way :eek:
 
Such nice people here

We're you all born experts ?? Or did someone show or tell you ??
 
lighten up ;)

it's partof everyones learning curve

you should see the things i've put in wrong way round or upside down :D
 
i did same thing with my lift.. its enough punishment having to take it all off again n swop over..

take the ribbin and ask first or do a search if ya unsure m8...
 
Sure about what ?
To someone unsure you may thing heavy ones to front as engine weight is there and forget about towing trailers etc am not saying anything wrong or right just find it amusing people find the need to make a fool out of fellow LR man

For all we know they might have sent a light duty back set and heavy duty front set of springs
 
You must log in or register to reply here.

Similar threads

C
2" lift spring and shock discovery 2
Replies
0
Views
223
Chips666
C
MAF Diver
Disco 2 Do you need extended shocks for a 0.8 inch lift at the front? Air suspension in the back (SLS)
Replies
13
Views
807
MAF Diver
MAF Diver
S
Discovery 1 4inch lift
Replies
5
Views
699
AJC12
A
L
2" LIFT FOR EXISTING SPRING CONVERSION
Replies
3
Views
530
Stanleysteamer
Stanleysteamer
MAF Diver
Disco 2 Something wrong? 2x the bump stop height measurements in a stock Discovery 2
Replies
2
Views
600
MAF Diver
MAF Diver