K

kaydl

New Member

• Oct 20, 2018

• #1

Hello friends I could do with some help, I now have a 51 rerg D2, it has springs and shockers , so the question is , if I give by D2 a 2ins lift do I need to change all the springs and shockers or just install a 2ins block on each corner...???? .... many thanks

 

1988smithy

Well-Known Member

• Oct 20, 2018

• #2

There's a good write up on here of how to lift a d2 I think @300bhp/ton did it

 

brian47

Well-Known Member

• Oct 21, 2018

• #3

1988smithy said:

There's a good write up on here of how to lift a d2 I think @300bhp/ton did it

Click to expand...

https://www.landyzone.co.uk/land-rover/lifting-a-d2-properly.300573/#post-3749057

 

AdamD1

Well-Known Member

• Oct 21, 2018

• #4

I wanted to but after reading everything that’s been posted I decided not to bother. I’ve got slightly bigger tyres (245/75/16), am taking the side steps, rear step and tow bar off and at some stage will look at some steel bumpers. Other than cross axling it once I never had any issues with my D1 at standard height, was after the look as much as the extra clearance.