F foxy333 New Member Aug 21, 2013 #1 Hi,,can anyone tell me how easy to renew gasket on oil filter housing were it bolts onto engine block ,,from what I can see appears to be two bolts to undo,,but is there any gears or anything to be aware of when removing thank you aly fraser
Hi,,can anyone tell me how easy to renew gasket on oil filter housing were it bolts onto engine block ,,from what I can see appears to be two bolts to undo,,but is there any gears or anything to be aware of when removing thank you aly fraser
Billy B Well-Known Member Aug 21, 2013 #2 From memory, its just a case of unbolting it. But it was a while ago I did mine Turboman would know the answer, I know he runs a 19j anorl
From memory, its just a case of unbolting it. But it was a while ago I did mine Turboman would know the answer, I know he runs a 19j anorl
Billy B Well-Known Member Aug 21, 2013 #3 Just check its defo the housing cause my leak was on the pressure switch, which is definitely just a screw in job
Just check its defo the housing cause my leak was on the pressure switch, which is definitely just a screw in job
F foxy333 New Member Aug 21, 2013 #4 Billy B said: Just check its defo the housing cause my leak was on the pressure switch, which is definitely just a screw in job Click to expand... good point Billy hard to see because vacuum pump is in the way but will check to make sure thanks for your comments
Billy B said: Just check its defo the housing cause my leak was on the pressure switch, which is definitely just a screw in job Click to expand... good point Billy hard to see because vacuum pump is in the way but will check to make sure thanks for your comments
