Perry8421

Member
Had to change battery and now comes up with key code lockout if you turn key in ignition it says press remote but still nothing eka no good either any idea
 
Had to change battery and now comes up with key code lockout if you turn key in ignition it says press remote but still nothing eka no good either any idea

Is the RF receiver plugged in?

How many times did you try to enter the EKA?

Was the central locking fully functional before you changed the battery?

@mozz smith is the man at getting these running without diag.
 
Put the key in the door and press the unlock button while unlocking and then lock while locking. It works on my 1999. ;)
 
Had to change battery and now comes up with key code lockout if you turn key in ignition it says press remote but still nothing eka no good either any idea
If you have key code lock out message you will have to wait for at least half an hour until the message clears before you can retry the EKA code.if you open the door after two attempts you can carry on trying and won't get lockout again. Make sure you enter the code precisely with the key returning to vertical between open and closed position.Good luck.;)
 

Similar threads