Hello All, i recently had a gearbox failure, had it reconditioned, but then had trouble with engine only reving to 2500 revs, finally traced it to Crank sensor getting bent by the flags on the flywheel. replaced the sensor, but now 1st or 2nd gear (not too sure which) over revs to 3000+ before changing, (in normal mode) and the rest of the gears change at 2500 as normal. In sport mode the change is over 3500 revs. When the gear should change there is always a flat spot (at 2500) then it stays in gear till 3000+ any help much appreciated.....
many thanks in advance...
Cess
many thanks in advance...
Cess