Paul Whipps

New Member
My Discovery 2 interior lights only work when switched by the switch on them ! What fiendish trickery or fault is this .If its black box magic what is the box called and where is it ? I take it door switchs are on the Locks them selves?Wot do the UK Discovery oracles think?
 
My Discovery 2 interior lights only work when switched by the switch on them ! What fiendish trickery or fault is this .If its black box magic what is the box called and where is it ? I take it door switchs are on the Locks them selves?Wot do the UK Discovery oracles think?
Sorry can't help but my 2000 v8 has same problem. lights work on switch but not on doors.
If any one can help I would be very gratefull. No fun in dark winter nights:(
 
Concentrate on this m8s ...here is the essence of it :

When a door is opened the BCU provides earth paths from the interior lamps,
the load space lamp and the ignition switch illumination through the BCU. The
earth path(s) from the lamp(s) is on PU wires, through header C0723 and
C0285 LHD/C0294 RHD to the BCU pin C0663-9.

U'll find these in RAVE Connector views...
also u can run circuit tests with nanocom/hawkeye for these... otherwise is a quite big job with a multimeter to locate where the earth is lost.
 

Similar threads