N

NUFCMark

New Member
Just bought my Defender 90 and I'm looking to fit alloys instead of the steel wheels. I'm not that keen on adding spacers or grinding things to get some clearance, so looking to see what'll go straight on?

The front hubs look to stick out a fair bit compared to some newer one's I've seen, and this looks the problem.... Drums on the back axle if that makes a difference....

IMAG0273_zps7e4e655d.jpg
 
Alloys won't fit straight on drum axles because the hub sticks out where the centre caps go

Have you thought about better looking steel wheels

I like these on my 90 , it's been resprayed now but you get the idea


9f2c2dc2.jpg
 
Thanks for that - yeah, they look really good!

Mine has discs on the front and drums on the back. I'm guessing that's the standard setup, or has mine been butchered at some point?
 
Been quoted £200 to have mine properly stripped and refurbed, but looking around a new set of steely's are not much more!
 
There are plenty of alloys that fit but personally I prefer decent steels, Wellers are a classic wheel and at £29ea brand new they are a bargain:

419854_10150999499212374_141081613_n.jpg


I personally prefer 15's as well, reason being that the mud shield sits almost perfectley inside the wheel and actually does a great job at keeping mud out, if you fit bigger wheels then the guard is pretty pointless....
 
Here's a question. Will 235's fit on same size rim as a 265? I have an old set of wella style steels with 265's on. Going to refurb a bit and been offered some smart 235's which I want to put on.
 
chunkymunky said:
Here's a question. Will 235's fit on same size rim as a 265? I have an old set of wella style steels with 265's on. Going to refurb a bit and been offered some smart 235's which I want to put on.
Click to expand...


They will but more chance of breaking the bead, well, it depends, what width are the wellers? if they are 8" then its fine, if they are 10" then no...
 
Jongould said:
There are plenty of alloys that fit but personally I prefer decent steels, Wellers are a classic wheel and at £29ea brand new they are a bargain:

419854_10150999499212374_141081613_n.jpg


I personally prefer 15's as well, reason being that the mud shield sits almost perfectley inside the wheel and actually does a great job at keeping mud out, if you fit bigger wheels then the guard is pretty pointless....
Click to expand...

Mine has 235/85/16 tyres on that have loads left on them, so gonna stick with the 16's. What PCD etc should I be looking for when looking at wheels? I've looked at the Weller site but can't see anything that mentions Landys...
 
Plenty of aftermarket alloys fit ealy hubs regardless of type of brake.

I personally have been running ZU's since they came out and they have been fine, prior to that I ran steel modulars.

SIDEON220712NOREG.jpg
 
chris mcc said:
Fire style fit also. The zu's look top but are quite expensive! Id go the steels are mentioned
Click to expand...

Firestyle are ok as they are designed for the earlier axle but you still have the problem with the centre-cap as the hub-cap sticks through. An extended cap is available (see below) but looks awfull in my opinion and without a cap they look incomplete.
At about £150 each ZU's aren't too expensive although they have gone up quite significantly. When I bought mine in 2007 they were only £99 each (I bought a full set of five, saves messing about with a miss-matched spare) but they are very hard wearing and mine still clean up like new which can't be said the the Weller Modular's which were starting to show rust spots by that age.



DSC00864.jpg
 
You must log in or register to reply here.

Similar threads

R
200tdi Defender alloys
Replies
8
Views
601
300bhp/ton
300bhp/ton
M
Best place to sell defender 90
Replies
2
Views
382
miktdish
miktdish
C
Defender 90 TD5 Roof Load.
Replies
5
Views
645
casey66
C
R
Post 90's/pre-L663 90 model with airbags? (First time Landy).
2
Replies
22
Views
2K
dag019
dag019
johnnymarrsbarres
Defender 90 tdci alarm question
Replies
5
Views
283
Wimblowdriver
Wimblowdriver