Hi Guys,
Changing Valve Stem Seals. On refitting the rocker gear, found an odd thing.
The rocker shaft mounting at number 4 cylinder has a hole from the rocker shaft and through to the head.
The mounting at number 1 has no hole in the cylinder head.
The rocker mounting hole will NOT line up with the corresponding hole in the head. It has been drilled off center. Is this suposed to be a return oil way?
.Does anyone know of an OIl Circulation diagram that I could download and see what is out off alignment.
Any advice on this would be appreciated.
Regards Mike

Welcome.

Sorry can’t help with your query, this is not really the best section to ask maybe try one of the forum sections below for the tech question and plenty of good guys will help.

https://www.landyzone.co.uk/forum/defender-90-110-130.7/
https://www.landyzone.co.uk/forum/engines.46/

we like pics in here ( of the landy)

good luck

J

Hello and welcome to landyzone

Welcome to the forum

Hi and welcome!