Hi all, I would like to replace the worn front door hinges on my C reg 110,
I have the replacement parts & have replaced the lower hinges after I cut 2
small holes in the foot panels as the nuts in the door post were spinning,
when I had a look at the top hinges there doesn't seem as much access to
allow a similar approach to the spinning nuts in the door post, any pointers
please other that to replace the door posts. Many thanks in advance.


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.718 / Virus Database: 474 - Release Date: 09/07/2004

The top ones are also spinning.

"Austin Shackles" <austin@ddol-las.fsnet.co.uk> wrote in message
news:had4f0l1qo6jpb4uh5jkdnrrkd2c4ia710@4ax.com...
> On or around Sun, 11 Jul 2004 20:15:13 +0100, "Big G" <nomail@myisp.com>
> enlightened us thusly:
>
> >Hi all, I would like to replace the worn front door hinges on my C reg
110,
> >I have the replacement parts & have replaced the lower hinges after I cut
2
> >small holes in the foot panels as the nuts in the door post were
spinning,
> >when I had a look at the top hinges there doesn't seem as much access to
> >allow a similar approach to the spinning nuts in the door post, any
pointers
> >please other that to replace the door posts. Many thanks in advance.
>
> are the nuts OK at the top or are they spinning too?
>
>
> --
> Austin Shackles. www.ddol-las.fsnet.co.uk my opinions are just that
> "Festina Lente" (Hasten slowly) Suetonius (c.70-c.140) Augustus, 25


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.718 / Virus Database: 474 - Release Date: 09/07/2004