jamesmartin
Well-Known Member
needed urgently, if anyone has one
i just hope you find itI have a Crownwheel but God knows where I put the pinion. It was going in the scrap
ok thanks for lookingJames I've checked but no pinion. Sorry it's somewhere kicking about but I can't see it
Aye they are.Vil I may be interested in the ends if they're disk
ok ive no idea how to strip it yet, but itll obviously have a pinion in there. To get it out do I need a case spreader?not yet , i do still need one
pulll half shafts out,32mm socket on pinion nut , undo the 2 caps 19mm socket ,2 x lever bar and prise out not on the teeth obviously, jai would want caliper brackets ,hubs ,shafts,drive members,stub axles etcAye they are.
Discs have done about... 500 miles ish. Along with the pads and the calipers were new too.
ok ive no idea how to strip it yet, but itll obviously have a pinion in there. To get it out do I need a case spreader?
umm....Vil give me a price and or anything you want in return swaps etc. Plenty of Landy bits. Depending on where you are could pop up one evening and strip wouldn't take much longer than 30mins/40mins with tools to hand. Will need to be drained of oil before hand.
I've been all over the country today from Brum to Gloucester and back to Bedfordshire.doing silly miles again!
J