[aollaku]

Hi all. I have a problem with my RR P38 2.5 DSE. When i strat the car on display say "Spos Air Manuale". I have other problem but i have to complete this first. THnx

 

[SpudH]

Has your rangie been converted to springs or has a manual inflation system been installed?

 

[wammers]

You will not be English then i take it, "EAS manual". Comes up in normal operation when vehicle is set in creep mode. But will also come up if it has had coils fitted and a loom has been added to inhibit normal EAS operation.

 

[aollaku]

Hi i have converted to spring . Thnx

 

[dogsbody]

Hi i have converted to spring . Thnx

That's what you get when you fit coils and short out the electronics for the air suspension.

 

[Mandy]

Puzzle solved

 

[aollaku]

What i have to do to remove that things???

 

[wammers]

What i have to do to remove that things???

Refit EAS.???? IF you have fitted the proper loom, it should come on when you start up, then go off as far as i am aware.

 

[aollaku]

No i dont like to use esa anymore, no more air spring. There is another posibility to remove that from the screen???

 

[wammers]

No i dont like to use esa anymore, no more air spring. There is another posibility to remove that from the screen???

As i said, with the correct bypass harness it should come on then go off as far as i know.

 

[aollaku]

How can i do that bypass ???

 

[Stufer]

How can i do that bypass ???

If the message comes on once at startup it sounds like the correct bypass is fitted and that's all you can do, unless someone knows different.

Just remember the P38A was not designed for springs, especially if towing or driving at high speed.

Stu

 

[wammers]

How can i do that bypass ???

If the message comes on then goes off after a short period. That is what is supposed to happen. It means it has the bypass harness fitted. You CANNOT stop it from coming on unless you return to air springs and remove the bypass harness. It is you who decided to go on coils, you will have to put up with it.