xyz switch won't calibrate

sniper3 · Oct 19, 2013

All gears were selecting but when driving once changed from 1st to second the m and s lights would flash and d flashing on the dash and selector lights.

I took a gamble on the xyz switch and bought a brand new one. Upon fitting the switch the bolts will not line up with the holes in order to display N on the dash (switch was fitted in the N position)

Help please

thanks

darrenm · Oct 19, 2013

We're abouts are you

sniper3 · Oct 19, 2013

Oldham

darrenm · Oct 19, 2013

when I did mine I managed to get someone to hold gear stick in park and push xyz switch into same position until park is desplayed on dash then bolted it up tight there is a little adjustment on cable if you get stuck pop over as I'm only 20 mins away in Chorley

darrenm · Oct 19, 2013

when I did mine I managed to get someone to hold gear stick in park and push xyz switch into same position until park is desplayed on dash then bolted it up tight there is a little adjustment on cable if you get stuck pop over as I'm only 20 mins away in Chorley[/QUOTE]

darrenm · Oct 22, 2013

Did you sort it

Dave1992 · Mar 19, 2018

darrenm said:
when I did mine I managed to get someone to hold gear stick in park and push xyz switch into same position until park is desplayed on dash then bolted it up tight there is a little adjustment on cable if you get stuck pop over as I'm only 20 mins away in Chorley

Hi pal im having same problem but mine wont go into reverse sometimes i have to mess with tbox to get it to select reverse

xyz switch won't calibrate

sniper3

Member

darrenm

Active Member

sniper3

Member

darrenm

Active Member

darrenm

Active Member

darrenm

Active Member

Dave1992

Member

Similar threads