Freelander 2 (LR2) Why is a breather hose so much money?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Lex Myster

Member
Posts
11
Location
East Sussex
Hi all,

Bit of a question moulded into a moan; I've been looking at getting a new breather hose that goes from the PCV to the air intake on my 2012 Freelander 2. Are they really £120+ it's literally a ~400mm long hose with 2 connectors on it?

Basically I will not be paying that for a new hose so I was wondering if any of you guys knew where to get the connectors from? I believe the hose should be ID 13mm, OD 19mm so I can find that pretty easily but the connectors are a bit harder to find.

Just for reference it's the green circled part:
1732795668324.png


Thanks all!
 
I adapted my air induct including the hose in the sketch above, i used an hose from a Rover 75 which was meant for the FBH it was cut to length and fixed with sprung clips.

From flutes to the later type.
yrPxEoll.jpg
1

uQj1NLZl.jpg
2

Hose from R40 FBH.
LGQGXNkl.jpg
3

Used a connector to join the hoses.
4ChnOOEl.jpg
4
 
That is an option however the connector at the intake end of the hose isn't sealing the best and so I would like to replace it to stop the recirculated oil seeping out.
Just change the O ring in the connector. I can't remember the size, but I had a kit of vehicle O rings that fitted just fine.
 
Back
Top