Over heating yet again, not long changed the rad, and the pump, so going to try cheep first, thermostat!! got an OME one last time about 3 years ago maybe 4 ... who knows, I am going to take it to the man, throw £300 or £400 at it, to sort the over heating out, and get a new injector
P38A Trouble in Dodge
- Thread starter Dopey
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
tarphenry
Well-Known Member
- Posts
- 1,540
- Location
- bury lancs
Have you checked the viscous fan, if thats not working properly, that will give you overheating problems.
tarphenry
Well-Known Member
- Posts
- 1,540
- Location
- bury lancs
Its not electric , its driven by a thick liquid ,and if its not functioning, it doesnt cool the liquid in the rad.The way to test it is to get the engine hot, stop it,push a rolled up newspaper into the fan about an inc and start engine. if it shreds the paper its ok if the fan doesnt turn then its U/S and needs changing
tarphenry
Well-Known Member
- Posts
- 1,540
- Location
- bury lancs
it will only take 5 minutes and at least it will rule it out if its ok.
Just tested it... it definitely fubar, like you said stuck the newspaper in and it stopped turning, even did it with my finger and no resistance on it at all, how long its been like that I dont know, but must have been a long time, thats for that, thats one less thing
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
You can hear my new one roar like a jet engine at first startup. Then it goes quiet as it loosens up. Only really seems to get used when you come down from motorwards speeds to a stop quickly. Or towing on hills.
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
Engine hot?
I got the OEM one from Island. I wonder now if the Land Rover one is quieter because I don't remember my old one ever being this loud. Mind you, at least I know it is working each morning!
tarphenry
Well-Known Member
- Posts
- 1,540
- Location
- bury lancs
If its petrol you can buy a new centre . if its diesel you have to buy the whole fan, just paid £70 for a new one off ebay for a diesel
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
It'll be a diesel.
£70 is good!
£70 is good!
- Posts
- 42,313
- Location
- Westminster
- Posts
- 58,170
- Location
- Preston Lancs.
Can be done with the hand IF you know what you are doing, done it many times still have all my fingers.
ovalandrover
Well-Known Member
- Posts
- 1,610
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
Says the part-number is for reference only. Price is about right for Britpart. I wonder?
- Posts
- 42,313
- Location
- Westminster
I don't buy papers anymore. Read all the news online. The test buggered my laptop but at least the fan's good.
G~
tarphenry
Well-Known Member
- Posts
- 1,540
- Location
- bury lancs
It is the one I purchased, its not a Britpart one and looks well made and the finish is good.
ovalandrover his feedback was iffy, got one @ Total Parts £67 I trust them more and a few ££ cheaper, the one I ordered is a Allmakes, so at least I know its not a **itpart they had a Berchmark as well for a few penny's more (looked exactly the same) he wont sell Britparts
