TD5 hard starting after changing pressure regulator seals

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Plasticdoner

New Member
Posts
5
Hya guys,

have had a fuel leak above the starter motor, replaced the seals and o rings on the pressure regulator housing, since then fuel leak has stopped but have a noisy fuel pump in the derv tank and starts as thought there is air in the system. have run it for several miles and the hard starting has only happened twice but still noisy fuel pump, can you connect the fuel pipes the wrong way round on the housing as i didn't mark them up:brick:
 
Back
Top