Freelander 1 TD4 M47 Coolant Fitting Part Number Needed

After installing new coolant pump & thermostat, onnected all the hoses & started putting water in for first flush.

Found the 90deg tee section near the oil cooler under the starter motor had snapped the 8mm outlet. No idea how that happened as I didn't touch those hoses.

Anyone know the part number for that tee piece ??

If it's the one in the pic then I certainly didn't have any luck finding one, it only comes with the hoses as far as I could gather. Mine had a small crack where one of the larger hoses pushes on but luckily it's been OK . I'm off to Newbury LR spares day next Sunday so I'm going to look for one there 'just in case', best of luck. I think the p/no is PCH118134, that's for the facelift TD4 M47.

Found this https://images.app.goo.gl/D4PUscxmWA3uCL659

Andy, those are certainly similar, but would need hose routing modified, plus one of those push-on fittings.

I have sent request to JLR classic parts to see what they come up with. Their online diagrams are the same as the one above with no part number !!

PEH101210 seems to have a suitable tee, but wrong hoses. Could adapt that if I can find at the right price !! Or even this Skoda one if the hose sizes are about right. Engine Coolant Tee Distributor Hose Connector

If all else fails, I will look at making something using plumbing fittings !!

Hi, what year/model is your one ? Sorry just looked at your 1st post again, looks like pre facelift.