Still emobilized

grafter · Aug 2, 2017

Hi everyone having been unable to use my rangey for the last six weeks due to emobilizer and key fob issues I have bought a synchmate from eBay hoping it would sort it out
Plugged it in and got 1 red flash the took it out then back in got 5 red flashs
1 flash engine management did not respond to wake up
5 flashes becm communication failure
Also when synchmate is trying to communicate there's a clicking noise coming from dash is there any relays I should be check
2000 4.6 p38
Please help

brianp38dse · Aug 2, 2017

Give the obd socket a spray with electrical contact cleaner and try socket in and out a few times my help, Do not use wd40.

wooly123 · Aug 2, 2017

grafter said:
Hi everyone having been unable to use my rangey for the last six weeks due to emobilizer and key fob issues I have bought a synchmate from eBay hoping it would sort it out
Plugged it in and got 1 red flash the took it out then back in got 5 red flashs
1 flash engine management did not respond to wake up
5 flashes becm communication failure
Also when synchmate is trying to communicate there's a clicking noise coming from dash is there any relays I should be check
2000 4.6 p38
Please help

make sure battery is fully charged,proberley, don"t need to tell you that,i expect you would do that anyway,good luck

Rick-the-Pick · Aug 3, 2017

Use your eka code first & get the vehicle mobilised, then use the sync-mate.

grafter · Aug 3, 2017

C

Rick-the-Pick said:
Use your eka code first & get the vehicle mobilised, then use the sync-mate.

hi car won't except eka code

Wazzajnr · Aug 3, 2017

grafter said:
C

hi car won't except eka code

Wrong code or duff switches on the drivers door?

wammers · Aug 3, 2017

If you have engine immobilised press fob or enter EKA code on the message centre it has nothing to do the Syncmate. Syncmate is for syncing EMS code from engine ECU to BECM, it has nothing to do with locking fob syncing or EKA code.

grafter · Aug 3, 2017

Replaced door lock with used one but don't know if that was f!!ked
Going to test both locks with volt meter later and see if that's the cause

Wazzajnr · Aug 3, 2017

wammers said:
If you have engine immobilised press fob or enter EKA code on the message centre it has nothing to do the Syncmate. Syncmate is for syncing EMS code from engine ECU to BECM, it has nothing to do with locking fob syncing or EKA code.

That's only on the diesels isn't it?

brianp38dse · Aug 3, 2017

Here is @martyuk test procedure on door locks he can help you out with a refurbed one if needed.

wammers · Aug 3, 2017

Wazzajnr said:
That's only on the diesels isn't it?

No.

Wazzajnr · Aug 3, 2017

wammers said:
No.

Ah well, we learn something new every day!

grafter · Aug 3, 2017

brianp38dse said:
Here is @martyuk test procedure on door locks he can help you out with a refurbed one if needed.

Thanks much appreciated

grafter · Aug 5, 2017

Hi all
Finally got the rangey up and running disconnected all becm and door out station multiplugs and cleaned took apart original door lock and cleaned and regreased then tested and everything was ok tested eBay lock and it failed put everything back together reconnected battery then got key code lock out on dash put key in ignition and it resynched itself then she fired up happy days
Thanks everyone for help much appreciated

brianp38dse · Aug 5, 2017

Well done, and got it sorted pretty quick.

Still emobilized

grafter

Member

brianp38dse

Well-Known Member

wooly123

Active Member

Rick-the-Pick

Active Member

grafter

Member

Wazzajnr

Well-Known Member

wammers

No longer with us, RIP

grafter

Member

Wazzajnr

Well-Known Member

brianp38dse

Well-Known Member

Attachments

wammers

No longer with us, RIP

Wazzajnr

Well-Known Member

grafter

Member

grafter

Member

brianp38dse

Well-Known Member

Similar threads