Rev counter

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
W

Wavey

New Member
Posts
176
Location
Darlo
When i got my disco, the rev counter wasnt working but the needle was flickering, I searched high n low and found it not connected to the back of the alternator propery.

After fitting a nut and tightening it up i got a battery warning light and nothing on the rev counter at all. So i removed the cable completely and now nothing at all no flickering nothing.

So where did i go wrong, and what do i do next?!
 
hi i take it its a 300 or similar,on the back of the alternator the rev gauge had a flat spade connector which the rev gauge connected to,remove this connector completly and put a new eyelet on the wire and bolt straight on to the same pole minus black looking L shapped piece,your rev gauge should work again,if no alternator light check you have not blown the fuse,tiga
 
I recon the alternator is nackerd too.

I had similar thing, firdt the light came on then went out but the rev counter stoped then it wirked again and the light came back on. Seemed to be charging ok but eventualy got round to changing the alternator and all my problems have gone away.
 
You must log in or register to reply here.

Similar threads

A
Td5 rev counter wiring
Replies
4
Views
924
Anaconda
A
Lazydave123
RRS L320 - Can I replace a bulb in the instrument closet
Replies
3
Views
949
Lazydave123
Lazydave123
H
Td5 wont rev
Replies
1
Views
548
Anaconda
A
A
Electrical or computer starting problems
Replies
12
Views
382
Ashlett
A
Z
Electric WTF have I done?
Replies
17
Views
2K
Stanleysteamer
Stanleysteamer
Back
Top