replaced battery . now no ignition

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
H

hesky

New Member
Posts
6
I put new batt on now nothing on dash . everything else works but wont turn over . just flashes up key in ignition .done al;l immobiliser stuff that's fine . wen you try start it you can hear a click. wich im sure is from under seat
 
sounds very much like irts not reading the key .! however if it was mine i would start at battery disconnect for 20 mins then making sure the key is out of the ign reconnect .

or try a different key if you have one .
 
I know this sounds like a stupid question, but how fully charged is the new battery? Is it just straight from the shop? Sometimes they need a bit of a charge up if they've been sitting around in a warehouse for a while.
 
Don't know if your alarm is the same as my 96 fender but to resync the key fob with the alarm you need to press the unlock button about five times in fairly quick succession.
 
You must log in or register to reply here.

Similar threads

S
Trouble with ignition switch wiring
Replies
11
Views
1K
tottot
tottot
M
Classic Range Rover Suffix D Starting Issues - Advice required please
Replies
6
Views
705
Datatek
Datatek
P
Series 3 Ignition Problem
2
Replies
23
Views
2K
Dippypud
Dippypud
O
Engine won't turn over (intermittent)
Replies
5
Views
920
Arctic2
Arctic2
M
Both FOB not working, car would not start
Replies
3
Views
995
maurizio82602
M
Back
Top