Rear tray back issue

smurphy · May 18, 2016

A friend of mine has had the rear of his Disco tray backed. I've been doing other works on this n he says it drives awful, I've watched it drive on a motorway doing around 50mph. The rear axle looks like it just skips along, he's running 35inch Silverstones has +11inch shocks, +2inch progressive springs, extended Johnny jointed trailing arms. Do you think putting twin shocks on the rear it with smooth the rear axle ride out along with balance beads?
Regards Steve

Jam1 · May 18, 2016

Hard to say really have you been through all the bushes, ball joints and mountings?

smurphy · May 18, 2016

Yer it seems as if the springs are to bouncy, like the shocks aren't dampening it enough. But I'm wondering if it's just the tyres with them been so big.

MaxyMan · May 19, 2016

Tyres got naff all do it with it. Will be the shocks.

Brown · May 24, 2016

Plus there'll be a lot less weight on the rear so the springs might be a bit 'stiff'.

If this link works here's Owl weighing the front and rear of his custom machine to calculate the best spring rate for the job.
https://www.landyzone.co.uk/land-rover/alrc-project.160626/page-33

Rear tray back issue

smurphy

Active Member

Jam1

Well-Known Member

smurphy

Active Member

MaxyMan

Well-Known Member

Brown

Well-Known Member

Similar threads