rear shocks cost

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
brianp38dse said:
Normally just jack up and support with axle stand and away you go with spanners and socket set.
but on a freelander 2 they are coil over type so will need coil spring compressors and a few other bit & bobs
best to ask over in the freelander section on the forum
https://www.landyzone.co.uk/forum/land-rover-freelander.9/
Click to expand...
brianp38dse said:
Normally just jack up and support with axle stand and away you go with spanners and socket set.
but on a freelander 2 they are coil over type so will need coil spring compressors and a few other bit & bobs
best to ask over in the freelander section on the forum
https://www.landyzone.co.uk/forum/land-rover-freelander.9/
Click to expand...
thankyou I will check it out.
 
Welcome to the forum
I7pha4t.jpg


Be careful if yer do the work yerself. There's a lot of compression in the srings, waiting to release if yer let them go. I would guess a garage would charge 2 or 3 hours labour + supply of parts. A tire fitter place would be cheaper.
 
You must log in or register to reply here.

Similar threads

A
Rear shocks + springs
2
Replies
22
Views
1K
Chalky.
Chalky.
A
130 Shock Absorber Size
Replies
2
Views
251
Aydencj
A
B
Which shocks?
Replies
14
Views
842
BigJessie
B
MAF Diver
Disco 2 Do you need extended shocks for a 0.8 inch lift at the front? Air suspension in the back (SLS)
Replies
13
Views
1K
MAF Diver
MAF Diver
C
2" lift spring and shock discovery 2
Replies
0
Views
357
Chips666
C
Back
Top