P38 Cubby box

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
oakey

oakey

Well-Known Member
Full Member
Posts
2,101
Location
Mull of Kintyre
Hello I want to reward my P38 for passing MOT first time by making cubby box work correctly.
Thje damper bit has never been fixed to the lid since I got the car and have no idea what fits on the end of the wee steel spigot that locates the damper.
Can anyone help?
 
Off the top of my head, the arm fastens to a moulding on the back face of the glovebox. Mine was snapped off so I made a new bracket and used 2 allen head screws with nuts on the back (screws went through the glovebox from the inside).
 
I haven't got that sort of cubby-hole as mine is the budget one. My lid is manually operated!

I think it is a sort of ball and socket arrangement and it just pops over the peg. There might be a small screw to hold it in. If I see one I'll try and take a photo for you.
 
Just had a look at the struts on eBay. Looks like it is a little screw at each end. In Nick's post does he talk about a rivet? Is that the peg you're taking about? Sounds like maybe you have to get the peg out and then replace it with a self tapper of some sort. Be careful with the lid as they're only thin and the plastic gets very brittle. I'd get the strut first and then try to see how it mounts.
 
You must log in or register to reply here.

Similar threads

C
Cubby box fitted today
Replies
2
Views
943
Bobsticle
Bobsticle
A
Air suspension problems
2
Replies
30
Views
3K
Alec1943
A
cborrman
Cubby box with tracker and door sensors
Replies
2
Views
1K
cborrman
cborrman
T
P38A P38 DSE Manual (non-EGR) No turbo boost
Replies
7
Views
656
Grrrrrr
Grrrrrr
K
What money should I be asking?
2
Replies
27
Views
4K
Karls
K
Back
Top