After having brake problems (all 3 lights lit ) I have fitted a second hand pump . After switching on the ignition I can hear and feel this one running the old didn't. However the abs , traction control and brake warning lights are still on. I have tried driving the car at about 25 miles an hour , no change and brakes are still spongy . Can anyone HELP. Please try to keep it simple , I'm a pensioner but the one thing I have on my side is time and patience. In anticipation I thank you all for taking the time out of your day for looking .Paul Vice AKA. Vicey
P38 2.5ltr diesel year 2000 brake problem
- Thread starter Paul vice
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
mozz smith
Well-Known Member
- Posts
- 1,690
- Location
- tameside manchester
Hi Paul , check abs relay and abs ecu = cheap labour job . regards Mozz
Datatek
Well-Known Member
- Posts
- 44,886
- Location
- Near Poitiers SW France
I answered on your other thread. Starting a new thread for the same problem is not a good idea.
Already fitted new relay , I haven't a clue what Ecu is or where to find it. By the way your bottle is on its way .
brianp38dse
Well-Known Member
- Posts
- 20,065
- Location
- heathrow
The brake ecu is behind the glove box just above the panel above your feet with the obd socket in passenger side rhd
and yours should be a wabco d with 4 wheel traction control
and yours should be a wabco d with 4 wheel traction control
Datatek
Well-Known Member
- Posts
- 44,886
- Location
- Near Poitiers SW France
Look at his other thread, he hasn't bled the brakes after changing the pump so no surprise that the 3 lights are on.
brianp38dse
Well-Known Member
- Posts
- 20,065
- Location
- heathrow
Noted but may help others if they are searching.
