Output shaft seal.

danny6801 · Oct 17, 2015

My transfer box has decided to pee oil out the front output shaft a week before I go away laning in it my problem is what type of hammer puller will be suitable to buy off eBay or similar. Is it a hard job 2.

5pc INNER BEARING PULLER SET REMOVER SLIDE HAMMER BLIND HOLE INTERNAL | eBay http://www.ebay.co.uk/itm/5pc-INNER...694739?hash=item419d67b913:g:t9AAAOSw0HVWAuME (Share from CM Browser)

jamesmartin · Oct 17, 2015

if its just the seal remove flange and prise old seal out no need of a slide hammer

fanatic · Oct 17, 2015

Will pull out with screwdriver,
Remove prop, loosen nut and remove flange

Pull seal out with large flat blade screwdriver

Fit new seql with drift

Refit removed parts with new felt washer

danny6801 · Oct 17, 2015

That's will be good news. How can you tell if the bearing has gone.

danny6801 · Oct 17, 2015

Hopefully will just be the seal as it's really losing a lot of oil very quickly. There doesn't seem to be any movement from the shaft.

jamesmartin · Oct 17, 2015

rotate it and feel it

danny6801 · Oct 17, 2015

Will do thanks again James hopefully just the seal.

Output shaft seal.

danny6801

Well-Known Member

jamesmartin

Well-Known Member

fanatic

RESPECT IS EARNED, BEATINGS ARE FREE ;-)

danny6801

Well-Known Member

danny6801

Well-Known Member

jamesmartin

Well-Known Member

danny6801

Well-Known Member

Similar threads