OBD reader stuck in port

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
wattfield

wattfield

AKA Dirk Diggler
Posts
27,697
Location
Ayrshire-by-the-puddle
I’ve just reprogrammed a spare key with an Autel AP200 reader, but it’s very difficult to remove from the port. Am I right in thinking it should just pull out or is there a tab to press or something else I’m missing?
It worked fine for the key, by the way!
 
wattfield said:
Strange, tried again and it came out no bother!
Click to expand...
lol, that is so annoying when that happens. Specially when you don't know you did different.

Had exactly the same type of thing clipping the master clutch cylinder on my motor recently. Tried loads of times with it not working, then all of a sudden its locked into place and good as gold o_O
 
GrumpyGel said:
lol, that is so annoying when that happens. Specially when you don't know you did different.

Had exactly the same type of thing clipping the master clutch cylinder on my motor recently. Tried loads of times with it not working, then all of a sudden its locked into place and good as gold o_O
Click to expand...
I had the same with the brake light switch when I had the three amigos a few years ago. Struggled like hell with it for 25 mins. Gave up and left it overnight. When I returned the next morning it came out instantly.
 
You must log in or register to reply here.

Similar threads

DollyBird
Engine disabled, keys not working, tried the guide “Re-synching the Range Rover P38 diesel engine with the Solved - BECM using a Nanocom” no luck
Replies
9
Views
1K
DollyBird
DollyBird
marjon
L322 Key fob case replacement.
Replies
5
Views
519
marjon
marjon
B
Freelander 2 (LR2) Parking sensors
Replies
10
Views
2K
BarriKuda
B
A
Sport Dynamic Response Fluid Leak 2007 HSE
Replies
2
Views
1K
alfapat
alfapat
MollyNomad
Freelander 1 Sunroof… what’s left of it
Replies
4
Views
1K
Mark Piercy
Mark Piercy
Back
Top