Need someone with good with lecy near Stroud,

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Jonnyb1990

Well-Known Member
Posts
2,013
Location
Gloucestershire
Morning,

Took the day off to start on a list of jobs,

Bought the WIPAC LED set to replace all me indicators,

Some however need their polarity changing,

Tried swapping of the wiring as suggested by using a crimping tool (I was crap to say the least),

Does anyone in the southwest who fancies £20 and a decent about of beer wish to help ?
 
I suspect I have crap earth judging by the state of the current rear indicators,

All gunked up with mud,

Thanks for the link, no video, but sought them out on youtube,

If I'd know it was that easy I'd of done it my self,

that said the rear lights I have that are pre 98 wiring should work but dont,

Either way help would be appreciated

:):):):)
 
I would put a multimeter on the wires from ya indicator to see what voltage your are getting if any, to eliminate the earths I would put the positive from cars indicator wire onto the multimeter and then link the negative on the multimeter back to battery earth( will tell you if the earth is bad)

Failing that if there is no voltage swap the relay back to see if it restores the voltage as it could be a faulty one. Not sure if they run through the hazard switch like my fender but that can sometimes burn out. Hope this helps :)
 
Last edited:
That sounds like a plan,

Shame I dont own a multimeter,

Might just take it down to Local auto electrical place (not halfords) to see what they think
 
That sounds like a plan,

Shame I dont own a multimeter,

Might just take it down to Local auto electrical place (not halfords) to see what they think

I thought they gave out multimeters and spanners with all landrovers ha ha.
Get ya hands on one and give it a go or alternatively use the old bulb holder and wires to check for power :) or use the led one just check it on the top of the battery first so you know it works
 
Old flashers work, just all new ones dont, highly confused, followed the instructions for a change lol

Going to use the 1 I butchered to test stuff on lo
 
Looks like I get to wear my little black number :D:D

Happy to come to you ratty as long as its not too far,

W.T.F. :eek:

You offer somebody a date - then you find he's two timing you with the chippie monster.



PM me and address / mobile number and me and my meters will be with you first thing.
 
Back
Top