LED reverse light install

Glynmoto · Feb 15, 2017

Hi guys
I've just bought a set of led's for my defender 110 2012. The reverse led don't have a plastic connecter like all the other lights. It has 2 wires, 1 black, 1 white. I know I will have to disconnect the battery to wire them up , but is there a quicker way ? Like taking a fuse out ? I'm not great when it comes to electrics..
Thanks for any response

Glyn

discool · Feb 15, 2017

Reverse lights aren't live until the ignition switch is in position two and also the reverse is selected in the gearbox.

Glynmoto · Feb 15, 2017

discool said:
Reverse lights aren't live until the ignition switch is in position two and also the reverse is selected in the gearbox.

Thanks discool,
Is that the same with the fog light too ?because that's the same with live wires instead of plastic connector
Thanks in advance
Glyn

Ian Maycock · Feb 15, 2017

You could always buy a couple of connectors fit them to the leds and then just plug them in like the rest.
cheers Ian

Roaming Wombat · Feb 15, 2017

In theory you should always isolate the power source when working on an electrical system, the reverse switch and ignition switch doesn't isolate the return line or any other electrical systems so you still need to be careful, on a landy its just as much effort to isolate the battery as get into the fuse box...

Glynmoto · Feb 16, 2017

Thanks guys for all your help. Now, I'm having trouble locating the "flasher unit" to replace with the new one to work with the LED'S. My defender is a 2012 model. I've looked in the fuse box under seat and under dash below steering wheel. ,Cant see anything...please help !
Thanks in advance

Roaming Wombat · Feb 16, 2017

behind the fuse box?

Coffeelandy · Feb 17, 2017

Glynmoto said:
Thanks guys for all your help. Now, I'm having trouble locating the "flasher unit" to replace with the new one to work with the LED'S. My defender is a 2012 model. I've looked in the fuse box under seat and under dash below steering wheel. ,Cant see anything...please help !
Thanks in advance

Activate the hazards and hunt for the click of the relay.

Roaming Wombat · Feb 17, 2017

Coffeelandy said:
Activate the hazards and hunt for the click of the relay.

If the flasher unit is kaput though they might not get any noise...

LED reverse light install

Glynmoto

New Member

discool

Well-Known Member

Glynmoto

New Member

Ian Maycock

Well-Known Member

Roaming Wombat

Well-Known Member

Glynmoto

New Member

Roaming Wombat

Well-Known Member

Coffeelandy

Well-Known Member

Roaming Wombat

Well-Known Member

Similar threads