Disco 2 Keyfob dead, any ideas

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Have you taken the case off to check the actual micro switch is still soldered to the circuit board or the board tracks have not corroded ? One of my keys had a 'good' switch but had come adrift of the board. Do you have a spare key, if so is that OK?
 
Andy Warren said:
Have you taken the case off to check the actual micro switch is still soldered to the circuit board or the board tracks have not corroded ? One of my keys had a 'good' switch but had come adrift of the board. Do you have a spare key, if so is that OK?
Click to expand...
Of course, no broken tracks, nothing I can see dislodged. Other key is OK.

Cleaned with IPA,, mechanically looks fine, only have a reflow left to try.
 
My plan is to buy a couple off Ebay, refurbish and get them coded to my D2.

Is this workable, what kit do I need?
Can a D2 recognise 3 fobs so I could not lose my working one?

If nanocom required, any near me? Will read ACE codes with my Hawkeye if required.
 
You must log in or register to reply here.

Similar threads

P
Dead Discovery 2
Replies
16
Views
822
Stanleysteamer
Stanleysteamer
sonicm1etn
intermittent completely dead fault TD5 D2
Replies
7
Views
430
Shedload
S
S
Flashing display
Replies
4
Views
221
Slaps
S
C
Disco 4 broken wire?
Replies
4
Views
666
Calrissian
C
dingwalldemon
D4 Audio problems!
Replies
0
Views
72
dingwalldemon
dingwalldemon
Back
Top