Hi peeps i am Alphonso,my FL2 is running very lumpy

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
fonzo007crysiskilla

fonzo007crysiskilla

New Member
Posts
2
Location
North Ayrshire,West Kilbride,Scotland
i am Alphonso,my FL2 is running very lumpy i fitted an inlet manifold due to it blowing out.
it actually burnt a hole in the manifold .
can anyone help maybe a checklist or where to look ,do the injectors need to be setup on diag 2 ,if so what is the firing sequence i have no clue but it rattles its nuts off when started or when the accelerator is slightly pressed
 
Welcome to the forum
I7pha4t.jpg


Ask in the Freelander section in the link below.

Main forum index:
https://www.landyzone.co.uk/forum

Freelander 1 and 2:
https://www.landyzone.co.uk/forum/land-rover-freelander.9
 
You must log in or register to reply here.

Similar threads

MikeFl4
P38A M51 Diesel – Its just not running right!! (video explanation for ease)
Replies
15
Views
3K
Datatek
Datatek
Andy Burrell
P38A LPG issue Resolved
2 3 4
Replies
79
Views
6K
Jon Dor
Jon Dor
2
TD5 110 INTERMITTENT POWER LOSS
Replies
11
Views
3K
Scooby22
Scooby22
htr
Freelander 1 My Winter Project
2
Replies
35
Views
4K
rob_bell
rob_bell
4
Freelander 1 Another Stinky Smokey Exhaust - Solved
Replies
11
Views
2K
GrumpyGel
GrumpyGel
Back
Top