Hi new on here and need your help
- Thread starter trotter
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
OldIrishWulf
Well-Known Member
- Posts
- 3,974
- Location
- Great green Hibernia .
From the description you've typed there,all I can say is it sounds like a wind up.
- Posts
- 83,296
- Location
- Embasinga stocæ
where is the "rattle" coming from?
front?
back?
left?
right?
Is it all the time or only certain occasions and if so, when?
front?
back?
left?
right?
Is it all the time or only certain occasions and if so, when?
OldIrishWulf
Well-Known Member
- Posts
- 3,974
- Location
- Great green Hibernia .
Diff mounts or exhaust rubber thingy.
- Posts
- 83,296
- Location
- Embasinga stocæ
top?
if its at the back, I reckon most likely is cracked chassis or subframe attachment.
if its at the back, I reckon most likely is cracked chassis or subframe attachment.
- Posts
- 83,296
- Location
- Embasinga stocæ
quite cheap and easy to do - but not at a dealers 
.
best to be absolutely certain before spending cash.
there is a full write-up in the Q and A's section, so yu can check it.
.best to be absolutely certain before spending cash.
there is a full write-up in the Q and A's section, so yu can check it.
Optimus Prime
Well-Known Member
- Posts
- 5,988
- Location
- Garden of England
sounds like a nut or something
OldIrishWulf
Well-Known Member
- Posts
- 3,974
- Location
- Great green Hibernia .
So its coming from the back of the engine?
Optimus Prime
Well-Known Member
- Posts
- 5,988
- Location
- Garden of England
engine exhaust manifold ? may well be a rattling heat shield on the exhaust.
- Posts
- 83,296
- Location
- Embasinga stocæ
Viz Valves - its a KV6.
get yoself a Rover 75 inlet fannymold and replace it.
.get yoself a Rover 75 inlet fannymold and replace it.
OldIrishWulf
Well-Known Member
- Posts
- 3,974
- Location
- Great green Hibernia .
I'm very sorry if you thought I was winding you up.This thread has made me smile.
