My bros got some on his camera so il try nd get them off him nxt time i see him. You dont want the aerosols unless your doin a very small area. Go to paint and finishes-paint-combicolour. Then just choose your colour, the orange i got is called RAL2000 i think.
DIY paint job?
- Thread starter LandyBerks
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
LandyBerks
New Member
- Posts
- 58
Awesome. I look forward to your pictures.
Is it required to sand back to almost bare metal or just quick prep to make a surface which is usable?
Need to get my photoshop (lack of) skills on the go and come up with some graphics for it.
Is it required to sand back to almost bare metal or just quick prep to make a surface which is usable?
Need to get my photoshop (lack of) skills on the go and come up with some graphics for it.
Last edited:
........ and come up with some graphics for it.
wot like flames, or a big stripe running down the center of it ?
LandyBerks
New Member
- Posts
- 58
lol nah.
Was gonna be something black n orange themed. Not sure yet tho. see what i come up with. It wont be anything special be assured
shinydiscoball
New Member
- Posts
- 1,242
- Location
- Weardale in sunny County Durham
If yer go down the spray route buy a respirator 3m make em and ya can get em outa b and q one likes this is good 3M 3M Vapour and Particulate Respirator | | Half Masks and Full Masks | Respiratory Protection | Personal Protective PPE | Protec Direct
Just to be safe coz paint don't do ya lungs much good especially etch primer which gives off cyanide amongst other things and 2 pack acryllic aint too good for ya either.
Just to be safe coz paint don't do ya lungs much good especially etch primer which gives off cyanide amongst other things and 2 pack acryllic aint too good for ya either.
Lol, yh im goin for the orange and black look too, at the end of the day if i dont like it i can always repaint it as its so fookin easy.lol nah.
Was gonna be something black n orange themed. Not sure yet tho. see what i come up with. It wont be anything special be assured
You need to make sure the surface is solid, by that i mean it isnt flaking or peeling off. I just sanded it with 400 grit, until the surface looks dull with hundreds of tiny scratches.Awesome. I look forward to your pictures.
Is it required to sand back to almost bare metal or just quick prep to make a surface which is usable?
Need to get my photoshop (lack of) skills on the go and come up with some graphics for it.
vivnap
Banned
- Posts
- 2,610
- Location
- south normanton
shinydiscoball
New Member
- Posts
- 1,242
- Location
- Weardale in sunny County Durham
Nice work there viv
Booger
New Member
- Posts
- 1,778
- Location
- Dorsetshire
Orange and black eh ?, both of you, kinda like this then ?
I was battling to picture it, but that is damn sexy. I really want to do mine matte black, but nothing says "give me heatstroke" like a black landrover in Africa
So instead of being excited about my new paintjob I'm a bit bummed, cause I'm going to from "Shoot Me" Nato Green, which I really like, to a colour I'm not crazy about. Thinking about and original period landy colour like mid grey ?
The darker of the two colours ;-)
Wait here is a series in Mid Grey, of course mine is an 85' 90.
Any better idea's on colour, and the first person that says pink is a poof
I was battling to picture it, but that is damn sexy. I really want to do mine matte black, but nothing says "give me heatstroke" like a black landrover in Africa
So instead of being excited about my new paintjob I'm a bit bummed, cause I'm going to from "Shoot Me" Nato Green, which I really like, to a colour I'm not crazy about. Thinking about and original period landy colour like mid grey ?
The darker of the two colours ;-)
Wait here is a series in Mid Grey, of course mine is an 85' 90.
Any better idea's on colour, and the first person that says pink is a poof
Last edited:
LandyBerks
New Member
- Posts
- 58
Salmon Red?
Yeah was thinking more yellow orange than reddy orange tho.
Turns out i really suck hard at photoshop, i only end up with a dody greeny orange looking photo. Never mind.
I guess an orbital sander will be the easiest for that. Perhaps do a side at a time and a few coats.
Damn thing is to big to fit in my garage tho (to tall) so gonna have to be done ont he road.
Its gonna get tangod
Yeah was thinking more yellow orange than reddy orange tho.
Turns out i really suck hard at photoshop, i only end up with a dody greeny orange looking photo. Never mind.
I guess an orbital sander will be the easiest for that. Perhaps do a side at a time and a few coats.
Damn thing is to big to fit in my garage tho (to tall) so gonna have to be done ont he road.
Its gonna get tangod
Booger
New Member
- Posts
- 1,778
- Location
- Dorsetshire
Not crazy about red, my last red car was set on fire by an angry african mob
have you seen this site Land Rover Paint Man | Paint for Land Rovers | Specialist in White Spirit Based, Synthetic & Zylene Based Enamels - Colour Chart 90-110 Defender I don't think the colours come out that accurate on the pc screen, but interessting nonetheless.
have you seen this site Land Rover Paint Man | Paint for Land Rovers | Specialist in White Spirit Based, Synthetic & Zylene Based Enamels - Colour Chart 90-110 Defender I don't think the colours come out that accurate on the pc screen, but interessting nonetheless.
I first started off with a grinder but found that it was too harsh so i ended up doing it all by hand, though that only took me about a day to sand the whole thing. The worst part if your doing it outside is the weather, it will either make or break your paintjob so make sure you check the forecast first!!:doh:
LandyBerks
New Member
- Posts
- 58
Don,
ever get those pics up of yours? i wanna see what the colour is like. Here is a couple of quick photoshops to show some potential.
Something along the lines of this.
Here is one for you Booger.
ever get those pics up of yours? i wanna see what the colour is like. Here is a couple of quick photoshops to show some potential.
Something along the lines of this.
Here is one for you Booger.
Booger
New Member
- Posts
- 1,778
- Location
- Dorsetshire
It's amazing how that that little black bunny makes any colour acceptable
I still can't decide on a colour for mine, now leaning towards G4 Challenge Orange, but not really convinced about anything :doh:
LandyBerks it looks like you landy is Matte Black, how have you found that as a colour ? Has it been really hot etc ??
I still can't decide on a colour for mine, now leaning towards G4 Challenge Orange, but not really convinced about anything :doh:
LandyBerks it looks like you landy is Matte Black, how have you found that as a colour ? Has it been really hot etc ??
LandyBerks
New Member
- Posts
- 58
its actually army green. The bonnet is black tho. Only had it about 3 weeks. Tbh its so full of holes there is plenty of ventilation, esp with the gun turrets (thats what i call them) open and doing 70 on the motorway.
Yeah i still not decided on a colour/theme yet either. The pink one could be good for a laugh tho, cos its really not me. would surprise people lol.
Yeah i still not decided on a colour/theme yet either. The pink one could be good for a laugh tho, cos its really not me. would surprise people lol.
Booger
New Member
- Posts
- 1,778
- Location
- Dorsetshire
If the pink one stopped near you, you would kind of expect Bruno to climb out
That's mine, and although I guess Matte Black, or possibly Satin Black is not the most sensible colour for an expedition vehicle, it is still something I am considering ! I figure if I put a big ass extraction fan on the roof, it will offset the extra heat issues...
Or maybe do it like an SVX, but without the gay grill in the front, and subtly replace the number 60 with 69
Last edited:
Maharishi
New Member
- Posts
- 5
- Location
- Englishmans castle.
Hiya
I'm also in the process of the same. Waiting for the LRO show at Peterborough, as I've previously seen paint stalls there.
Let me know how you get on and I may be asking you for tips soon.
Good luck.
I'm also in the process of the same. Waiting for the LRO show at Peterborough, as I've previously seen paint stalls there.
Let me know how you get on and I may be asking you for tips soon.
Good luck.
Cellulose Paint supplied in Aerosols and tins from 250ml to 5L at
AutoPaints | Car Paints | Custom Paint for Cars
Have used them before. All you have to do is provide the colour code and they will supply you with the paint. It only takes a couple of days to get it delivered too. Best of luck.
AutoPaints | Car Paints | Custom Paint for Cars
Have used them before. All you have to do is provide the colour code and they will supply you with the paint. It only takes a couple of days to get it delivered too. Best of luck.
![[JP]](/data/avatars/m/29/29578.jpg?1437394565){kind=avatar}
[JP]
New Member
- Posts
- 3,980
- Location
- Newbury, Berks
of course you have used them..
one post, a search on the product you are selling, find a thread and post about it.
brilliant!
one post, a search on the product you are selling, find a thread and post about it.
brilliant!
