bulkhead post to post hole centers

lenny the landy · Sep 4, 2010

Has anyone got information on the measurements for the bulkhead door post to door post or chassis outrigger to chassis outrigger hole centres for a series 2A I am guessing at 1505 mm but as the bulkhead & outrigger are so rotten they have crumbled I managed to measure but not sure if this is correct have got the bulkhead off and ready to rebuild both sides have looked in the manual but it only states the chassis measurements overall and not hole centres can anyone help thanks

lenny the landy · Sep 7, 2010

Brnocz has emailed me a size this may help others
(Brnocz) ive just measured my bulk head bolts, taking into account mine is a series3, the distance from bolt hole to bolt hole is 1.510 which is a little slight diference to yours, also the bulk head is across the bottm of the w/screen 1.525. from pillar to pillar taken from the bottom of the bulk head pillars is 1.610 from the bottom of pillars to center of bolt holes is 50mm. hope this helps you regards jim.
thanks alot Jim this has really helped me
we need more information on any hole centre`s that the manual doesn`t state its a nightmare rebuilding the body when its been damaged or rotten and trying to guess the centres
hope this helps others

bulkhead post to post hole centers

lenny the landy

Member

lenny the landy

Member

Similar threads