Broke down already

horse62 · Sep 5, 2010

Hi yes i undone that big nut and the innards sprung out

and it reveals a bigger hole that the union just falls in to, so I put it back again.

horse62 · Sep 6, 2010

I phoned "Island 4X4" who i bought the pump from and they have never had this problem to their knowledge, as they are only a 40 min drive away I am nipping the old pump over to them to have a look at along with the Britpart one they supplied me with.

D1SCO · Sep 6, 2010

have you tried taking the adapter thingy off the end of the pipe?, looks like the adapter came out of the old pump on the pipe?.

horse62 · Sep 6, 2010

D1SCO my friend I owe you a pint buddy, you were spot on!!! the fecking adaptor was on the end of my pipe, but because the thread fitted the hole I failed to notice, and you stopped me from wasting 50 miles and looking a right pillock

Well done mate thanks a lot

Andy

D1SCO · Sep 6, 2010

Happy days m8

rollin danny · Sep 6, 2010

D1SCO said:
have you tried taking the adapter thingy off the end of the pipe?, looks like the adapter came out of the old pump on the pipe?.

I had spotted that but was giving the rest of you a chance to prove yourselves

horse62 · Sep 7, 2010

I believe you Danny

One lesson I learned the hard way this morning is when bleeding the PAS system dont keep undoing the bleed nipple if nothing comes out, give it time for the air to shift out of the system.

I ended up with the nipple flying out and a jet of fluid hitting the bonnet

Talk about mess!!!!

Andy

Broke down already

horse62

Active Member

horse62

Active Member

D1SCO

New Member

horse62

Active Member

D1SCO

New Member

rollin danny

Well-Known Member

horse62

Active Member

Similar threads