Disco 2 Anyone know what this is?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Juliak

New Member
Posts
2
Location
Fenland
I've tried to find out but haven't been able to as yet...
20210729_161927[1].jpg
20210729_161938[1].jpg
 
Of course it will restrict it slightly if you use an internal joiner but I was thinking using a piece of hose with the I.D big enough to take the O.D of the existing tube & glue together.;) Then route the drain correctly where it won't get squished.:)
 
Thanks everyone, I've removed and cleaned it now I know what it is. I'm not terribly bothered about the kink in the pipe above as it's only a slight one - when I re-assemble the light 'cluster' I'll check if it rests on it and adjust accordingly.:)
 
Back
Top