Another ******* problem.

cambridgecockney · May 28, 2021

My front wipers and washers stopped working rear wash wipe worked ok. I have just had fitted a new wiper stalk and still no front wipers. Guess i shouldnt have bought another land rover. 2010 Feelander td4 HSE(soon for sale).

cambridgecockney · May 28, 2021

The front wash does work just not the wipers. Anyone know if controlled by a bcu. Motor works if you put live to it but no permanent live feed, this is according to garage. He insists motor is ok when a live feed added. £181.98 for a new one from landrover which i dont mind if i need it.

Nodge68 · May 28, 2021

Diagnostic is needed.

Stv123 · May 28, 2021

Swapping things randomly can be an expensive way to fix things

Nodge68 · May 28, 2021

Stv123 said:
Swapping things randomly can be an expensive way to fix things

And not practical on a computer controlled vehicle like the FL2

Stv123 · May 28, 2021

Of course some items have to be programmed in before they will work

Nodge68 · May 28, 2021

cambridgecockney said:
Anyone know if controlled by a bcu.

Yes the wipers are under CJB (BCU) control.
However I'd be checking the electrical connections under the CJB, which can get disturbed by passenger's feet.

cambridgecockney · May 29, 2021

I have plugged in my delphi diagnostic and shows 2 faults i cant clear, B10A2 Crash signal and 92ca unkown.
I have also used it to tell me what the wiper position switches are doing when using wiper stalk. All positions show switch off and as i go through wiper switch positions it say switch on. There is no movement of wipers yet the mechanic told me the wiper motor works if he adds live feed.

Nodge68 · May 29, 2021

cambridgecockney said:
I have plugged in my delphi diagnostic and shows 2 faults i cant clear, B10A2 Crash signal and 92ca unkown.

The only diagnostic that I know to clear the dreaded CRASH status is JLR SDD, which takes about 5 minutes to run the clear routine.

If the Delphi is showing the wiper switch is working, then the issue is between the CJB software and wiper motor, so either an output FET (unlikely), or a wiring issue.
Presumably you've checked the wiper fuse (F22) and relay (R11) in the engine bay fuse box.

cambridgecockney · May 29, 2021

Thanks for your help and advice. Just bought this Jaguar Land Rover JLR SDD 160.04 Diagnostics Dedicated Laptop Mangoose PRO | eBay. Had nanocom and hawkeye plus for my disco, sold so i spent on JLR SDD.

Another ******* problem.

cambridgecockney

Active Member

cambridgecockney

Active Member

Nodge68

Well-Known Member

Stv123

Active Member

Nodge68

Well-Known Member

Stv123

Active Member

Nodge68

Well-Known Member

cambridgecockney

Active Member

Nodge68

Well-Known Member

cambridgecockney

Active Member

Similar threads