300 tdi Timing belt kit

discool · Sep 3, 2009

You may find the info u are looking for in here. Bearmach Service Kits Catalogue - 4x4 Store

Hammer Man · Sep 3, 2009

Thanks for that Discool, I still cant find a fan belt to buy though..

discool · Sep 3, 2009

Hammer Man said:
Thanks for that Discool, I still cant find a fan belt to buy though..

Have a look for a part number on the belt you want you may be lucky and still be able to see it'

Jason2 · Sep 3, 2009

Hammer Man said:
Thanks for that Discool, I still cant find a fan belt to buy though..

That's because there in't one

It's a viscous jobby

Alternator belt with or without aircon?

Hammer Man · Sep 3, 2009

discool said:
Have a look for a part number on the belt you want you may be lucky and still be able to see it'

didn't think of that, will take a look...

Jason2 said:
That's because there in't one It's a viscous jobby

Alternator belt with or without aircon?

What does that mean? There is no fan belt? The car has no Air con..

discool · Sep 3, 2009

There is still a belt turning the viscose fan, the later V8's only have a single 'serpentine' belt that does it all.
Fan belt is a generic term for all the external drive belts what ever they are used for.

Hammer Man · Sep 4, 2009

Right, so there is more than one belt? One that perhaps I cannot see?

I did manage to find a number on the belt I can see - its 7PK 1595

andyb66 · Sep 4, 2009

Hammer Man said:
I did manage to find a number on the belt I can see - its 7PK 1595

That is what I would call the serpentine belt that runs the power steering, alternator and water pump from the crank shaft.

The cambelt is under the cover directly behind the serpentine belt.

Hammer Man · Sep 4, 2009

Thanks Andyb,

I am still wondering though, do I need a cambelt or a cambelt kit? Does it matter about the kit or is that just for when something breaks and for a change you just need a belt??

Thanks for all your help,

HM

andyb66 · Sep 5, 2009

I personally always fit a kit, the tensioner and idler pulleys go round about 6 times per engine revolution so I wouldn't expect them to last forever

Hammer Man · Sep 5, 2009

Cheers Andy, I'll order a kit.

Jason2 · Sep 5, 2009

Hammer Man said:
Cheers Andy, I'll order a kit.

What make of kit you going to fit then?

Hammer Man · Sep 5, 2009

I'm going to order the one that discool linked to on page one of this thread.. Drayco Timing belt. I won't be fitting it as I don't know how but my father in law has a friend who may be able to show me how to do it, just waiting to hear back from him. If it turns out I can't find anyone to show me then I won't buy it I will just have to book it in to a garage for them to do it (I'm really hoping to get to see how its done though)

TIMINGKIT300E Timing Belt Kit - Disco 300TDI to VA560897

The Mad Hat Man · Sep 5, 2009

Must be someone up your neck of the woods that has done it and can assist ya?

Jason2 · Sep 5, 2009

Great!

So getting back to the point of this thread that's the last kit that I fitted to my Disco and the belt tensioner bearing went after 7K.

Phoned paddocks, the belt is Dayco but they could'nt tell me the make of the tensioners, phoned Land Rover again to see if they had fooked up with the price, No still £300 "but you get all the seals sir!" wow.

There must be something inbetween £50 & £300????

pussyeater · Sep 5, 2009

Jason2 said:
Can anybody recomend a GOOD make of timing belt kit for a 300tdi Disco.

Reason I ask is the last one I fitted the tensioner bearing started making a right racket after about 7k miles.

Cheers

Jason

Gates
Dayco
INA

Dayco make the original belts but i dont think they make the tensioners

Gates make their own belts and use original tensioners

all are genuine quality though

Jason2 · Sep 5, 2009

pussyeater said:
Gates
Dayco
INA

Dayco make the original belts but i dont think they make the tensioners

Gates make their own belts and use original tensioners

all are genuine quality though

Thanxs

1997 Discovery · Sep 19, 2009

I am trying to fit a new drive/auxillary belt ona 1997 Discovery non-aircon.

I have been on it for the past two hours, I have the correct belt but trying to lift the tensioner and slip the belt of the last pulley is driving me nuts, is there an easier solution or which pulley do I leave till last.

A garage said I would have to remove the alternator but cant see how thats going to help.

Nigel

Paul D · Sep 19, 2009

Easiest to do it with two people, but on my own I found it easiest to leave the tensioner as the last pulley, 'cos then you're moving it with your othr hand close by.

Have a spanner ready on the tensioner nut, fit the belt loosely to all the other pulleys and use your left hand to apply downward tension to it, just enough to hold it in place alongside the tensioner pulley, then your right hand lifts the spanner to lift the tensioner and the belt just slides in.

PS go into UserCP and put a location in .. jusr the town you live in will do, maybe someone with more experience might pop along to help!

1997 Discovery · Sep 19, 2009

I did try leaving the tensioner as the last pulley but always found that the spanner got in the way when trying to slide the belt underneath it.

I will try again in the morning

Thank you for the reply.

Nigel

300 tdi Timing belt kit

Well-Known Member

New Member

Well-Known Member

Well-Known Member

New Member

Well-Known Member

New Member

Well-Known Member

New Member

Well-Known Member

New Member

Well-Known Member

New Member

Well-Known Member

Well-Known Member

New Member

Well-Known Member

Active Member

Old, nackered 'n broke, but the Landy is fine . :)

Active Member

Similar threads