Death wobble and swivel pin preload.

[the_wolf]

Adjust your steering lock stops. And buy actual swivel grease in the tubes, you don't remove it from the tube like that before using it. Do you squeeze all your toothpaste into a bowl first anaw?

 

[LG199714]

Adjust your steering lock stops. And buy actual swivel grease in the tubes, you don't remove it from the tube like that before using it. Do you squeeze all your toothpaste into a bowl first anaw?

"Do you squeeze all your toothpaste into a bowl first anaw?"

Yes, but not a bowl, a funnel. there is a difference..... But also, a mouth is 48milimeters from top to bottom so that is a big difference compared to a little fill hole.

Bought the LR one shot crap. Waste of money. Please be the next person to tell me to use it to prevent leaks hahaha

But please explain after looking at my photo why this grease is not going in???? This would be more helpful

 

[meego]

"Do you squeeze all your toothpaste into a bowl first anaw?"

Yes, but not a bowl, a funnel. there is a difference..... But also, a mouth is 48milimeters from top to bottom so that is a big difference compared to a little fill hole.

Bought the LR one shot crap. Waste of money. Please be the next person to tell me to use it to prevent leaks hahaha

But please explain after looking at my photo why this grease is not going in???? This would be more helpful

Is this how the grease you used came ??

If yes, this packaging is designed for the narrow end to go into the “whole”. It is well designed and it works well, with no requirement to heat it or remove the grease prior to using it.

 

[LG199714]

I see now, must have been a new design but that is definitely not what mine looked like. That is a super pointy end.

Yeah, If I had that design of a bag would have fit perfectly. I didn't take a photo but basically it was square. The end bit was like the bottom left corner

 

[Anaconda]

Yes you can get square ones with a tube/pipe in the corner, shove it in the hole in the swivel housing and squeeze it in, simples!

 

[the_wolf]

"Do you squeeze all your toothpaste into a bowl first anaw?"

Yes, but not a bowl, a funnel. there is a difference..... But also, a mouth is 48milimeters from top to bottom so that is a big difference compared to a little fill hole.

Bought the LR one shot crap. Waste of money. Please be the next person to tell me to use it to prevent leaks hahaha

But please explain after looking at my photo why this grease is not going in???? This would be more helpful

How do I do the Naked Gun facepalm gif?
The one shot grease works absolutely fine, pretty much most people use it including myself and I've never her a problem with it. Your grease isn't going in because you scooped it into a ****ing funnel and are hoping gravity will work it's magic. It's grease, not water.

 

[LG199714]

Yes you can get square ones with a tube/pipe in the corner, shove it in the hole in the swivel housing and squeeze it in, simples!

But for what LR charges for this stuff, at least give a quality case or be consistent on your packaging

Even britpart made a practical case...... But this is the type of cap i meant.

 

[LG199714]

How do I do the Naked Gun facepalm gif?
The one shot grease works absolutely fine, pretty much most people use it including myself and I've never her a problem with it. Your grease isn't going in because you scooped it into a ****ing funnel and are hoping gravity will work it's magic. It's grease, not water.

Adjusting the steering lock stops as you mentioned could have probably helped and perhaps the sachet would have been fine I am guessing.