How to check oil on gearbox?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
On the early models you can open up the fill plug on the gearbox

If oil doesn't drop out then it needs topping up

Unless on the later models the oil is checked electronically or through a dipstick
 
2.0_hippo said:
On the early models you can open up the fill plug on the gearbox

If oil doesn't drop out then it needs topping up

Unless on the later models the oil is checked electronically or through a dipstick
Click to expand...
Does it not require the oil at 40C and the engine running to set the level on the early ones or am I dreaming? The later cars may well be different and this is a TD V8 with a totaly different box but I would still think it may need the engine running.
 
I’ve attached some instructions in case it helps (single page .pdf).

The combined filler/level plug is on the RH side of the casing :

Filler_levelplug.jpg


Only use ZF Lifeguard Fluid 6 in you 6HP26

ZFLifeguardFluid6.jpg



A very common area for fluid leakage is the seals on the electrical connector sleeves :

Connectorsleeve.jpg


Connectorsleeveleak_zps94ff3255.jpg


so that might be worth checking?

Phil
 

Attachments

  • ZF_Transimission_Fluid_Level_Checking_6HP26X_landrover_fluid_level.pdf
    211.8 KB · Views: 350
Cheers for that information! Will have a look if it's coming from the plug.

Saint.V8,

Where in Surrey do you live, when I'm allowed to ask?
 
Last edited:
PPCHR said:
Cheers for that information! Will have a look if it's coming from the plug.

Saint.V8,

Where in Surrey do you live, when I'm allowed to ask?
Click to expand...
A few miles outside of Guildford....

donp38 said:
I need to remember this thread for when I do filter and oil change in the summer..

Many thanks...
Click to expand...
Bembles Info is for the 6HP26 fitted to the later models....although similar process for the earlier L322's
 
Bemble said:
Ive attached some instructions in case it helps (single page .pdf).

The combined filler/level plug is on the RH side of the casing :

Filler_levelplug.jpg


Only use ZF Lifeguard Fluid 6 in you 6HP26

ZFLifeguardFluid6.jpg



A very common area for fluid leakage is the seals on the electrical connector sleeves :

Connectorsleeve.jpg


Connectorsleeveleak_zps94ff3255.jpg


so that might be worth checking?

Phil
Click to expand...
Hi

I have struggled to find the gearbox fill plug for my partners
Range Rover Vogue 2007 Desiel V8 think L320 or L322. Reg RA07CUU Nd vin ends in A254600. Think the gearbox is 6 speed and level goes inline from park to drive and does have a L shape.

I have drained the gearbox oil and changed the plastic filter pan. Now I need to fill it if the fill pl7g can accessed by crawling under the car.

Your picture shown a 8mm hex plug in this post on the NS passenger side for UK cars.
When I looked under car I could not see this fill plug.

Do you know where it is please.

My new post link is
https://www.rangerovers.net/threads/range-rover-vogue-se-l320-6-speed-3-6l-2007.364309/
Incase you can answer there.

Regards
Ken
 
The clue is there if you re-read the post....
"The combined filler/level plug is on the RH side of the casing"
Right-hand-side is the same, whichever side of the car you drive from.
 
You must log in or register to reply here.

Similar threads

ar1g3
P38A P38 rattle at idle
2
Replies
26
Views
1K
roythebus
R
T
Whats this noise? Help please
Replies
10
Views
512
Henry_b
Henry_b
Chris1993
Sport Range Rover oil leak
Replies
2
Views
708
Graculus
Graculus
B
MOT failure
Replies
5
Views
980
roythebus
R
B
Range rover sport 3.0 V6 2010 leaking gear box
Replies
5
Views
478
Mark Piercy
Mark Piercy
Back
Top