P38A Steering wheel decals

Flossie · Saturday at 20:52

Rubberknees said:
If you're ever up this way you can call in and do mine. Top work my man

It's actually really easy, honest.
No need to remove the steering wheel, just 4 torq bolts and the airbag is off. Manually flick two tabs with your finger on each switch and that enables you too slide them sideways off the wheel. Then each switch has two , well 4 actually, but you only need to prise 2, lugs free,using a small flat bladed screwdriver and the switch comes apart in two pieces, release the printed ribbon thing, that just fits on two plastic posts, and that's it, repeat for each switch. You can't mix up or fit the two half's of each switch wrong when reassembling because of the way they mate together.
The decals are easy to do once you've done the first one you'll wonder what all the fuss was.

Rubberknees · Saturday at 20:56

Flossie said:
It's actually really easy, honest.
No need to remove the steering wheel, just 4 torq bolts and the airbag is off. Manually flick two tabs with your finger on each switch and that enables you too slide them sideways off the wheel. Then each switch has two , well 4 actually, but you only need to prise 2, lugs free,using a small flat bladed screwdriver and the switch comes apart in two pieces, release the printed ribbon thing, that just fits on two plastic posts, and that's it, repeat for each switch. You can't mix up or fit the two half's of each switch wrong when reassembling because of the way they mate together.
The decals are easy to do once you've done the first one you'll wonder what all the fuss was.

Sounds easy but these days its even easier siting and watching other people do the work

cornishboater · Sunday at 11:16

Flossie said:
It's actually really easy, honest.
No need to remove the steering wheel, just 4 torq bolts and the airbag is off. Manually flick two tabs with your finger on each switch and that enables you too slide them sideways off the wheel. Then each switch has two , well 4 actually, but you only need to prise 2, lugs free,using a small flat bladed screwdriver and the switch comes apart in two pieces, release the printed ribbon thing, that just fits on two plastic posts, and that's it, repeat for each switch. You can't mix up or fit the two half's of each switch wrong when reassembling because of the way they mate together.
The decals are easy to do once you've done the first one you'll wonder what all the fuss was.

I hope you disconnected the battery, air bags are a right royal PIA when they throw you out the tailgate

Flossie · Sunday at 17:03

cornishboater said:
I hope you disconnected the battery, air bags are a right royal PIA when they throw you out the tailgate

See post #16.

Flossie · Sunday at 17:08

Doing the decals also vastly improves your mpg. :vb-weyes:

Never seen more than 24 knocking about.
Ps...I know they fib.
I actually saw 28.2 but the missis wasn't quick enough with the camera.

Flossie · Monday at 23:12

It kept going up and up today, reached 32 and still climbing , then realised I was looking at the trip :vb-lol:

Rubberknees · Tuesday at 08:11

Flossie said:
It kept going up and up today, reached 32 and still climbing , then realised I was looking at the trip

You should have gone to Spec savers :vb-flippy:

Datatek · Tuesday at 09:09

Flossie said:
It kept going up and up today, reached 32 and still climbing , then realised I was looking at the trip

I've done that

Flossie · Tuesday at 09:21

Rubberknees said:
You should have gone to Spec savers

I had me lookers on not me see ers.

P38A Steering wheel decals

Flossie

Well-Known Member

Rubberknees

Well-Known Member

cornishboater

Well-Known Member

Flossie

Well-Known Member

Flossie

Well-Known Member

Flossie

Well-Known Member

Rubberknees

Well-Known Member

Datatek

Well-Known Member

Flossie

Well-Known Member

Similar threads